​
Event Information

  1. The Microsoft.Network.routeTables.write event in Azure for AzureNetwork refers to the action of creating or updating a route table in the Azure virtual network.
  2. This event indicates that changes have been made to the routing configuration of the virtual network, such as adding or modifying routes.
  3. It is important to monitor this event as it can impact the network traffic flow within the virtual network and ensure that the routing configuration is correctly set up for the desired network connectivity.

​
Examples

  1. Unauthorized modification of route tables: If security is impacted with Microsoft.Network.routeTables.write in Azure for AzureNetwork, it could potentially allow an attacker to modify the route tables associated with the Azure Network. This could lead to unauthorized traffic redirection, allowing the attacker to gain access to sensitive resources or disrupt network connectivity.

  2. Network traffic interception: Another security impact of Microsoft.Network.routeTables.write in Azure for AzureNetwork is the potential for network traffic interception. By modifying the route tables, an attacker could redirect network traffic to a malicious destination, allowing them to intercept and potentially manipulate sensitive data being transmitted over the network.

  3. Denial of Service (DoS) attacks: Modifying route tables through Microsoft.Network.routeTables.write in Azure for AzureNetwork could also be leveraged to launch DoS attacks. By redirecting traffic or creating routing loops, an attacker could overwhelm network resources, causing service disruptions and impacting the availability of critical applications and services.

​
Remediation

​
Using Console

To remediate the issues mentioned in the previous response for Azure Network using the Azure console, you can follow these step-by-step instructions:

  1. Enable Network Security Groups (NSGs):

    • Go to the Azure portal and navigate to the desired virtual network.
    • Select “Network security groups” from the left-hand menu.
    • Click on “Add” to create a new NSG or select an existing NSG.
    • Configure inbound and outbound security rules based on your requirements.
    • Apply the NSG to the desired subnets or network interfaces.

  2. Implement Azure DDoS Protection Standard:

    • Go to the Azure portal and navigate to the desired virtual network.
    • Select “Distributed denial of service (DDoS) protection” from the left-hand menu.
    • Click on “Enable DDoS protection” and choose the “Standard” tier.
    • Configure the DDoS protection settings based on your requirements.
    • Apply the DDoS protection to the desired resources within the virtual network.

  3. Implement Azure Firewall:

    • Go to the Azure portal and navigate to the desired virtual network.
    • Select “Firewalls and virtual networks” from the left-hand menu.
    • Click on “Add” to create a new Azure Firewall or select an existing one.
    • Configure the firewall rules and network rules based on your requirements.
    • Associate the Azure Firewall with the desired subnets or network interfaces.

Note: The above instructions provide a general overview of the steps involved in remediating the mentioned issues. It is important to consider your specific requirements and consult the Azure documentation for detailed instructions and best practices.

​
Using CLI

To remediate issues related to Azure Network using Azure CLI, you can use the following commands:

  1. Example 1: Enable Network Security Group (NSG) Flow Logs

    • Command: az network watcher flow-log configure
    • Description: This command enables flow logs for a specific NSG, allowing you to capture and analyze network traffic.
    • Parameters: You need to provide the resource group name, NSG name, storage account ID, and storage account key.

  2. Example 2: Restrict Network Access using Network Security Groups (NSGs)

    • Command: az network nsg rule create
    • Description: This command creates a new rule in an NSG to restrict network access based on specific criteria.
    • Parameters: You need to provide the resource group name, NSG name, rule name, priority, source/destination IP addresses, ports, and action.

  3. Example 3: Enable Azure DDoS Protection Standard

    • Command: az network ddos-protection update
    • Description: This command enables Azure DDoS Protection Standard for a specific virtual network, providing protection against DDoS attacks.
    • Parameters: You need to provide the resource group name and virtual network name.

Please note that the actual CLI commands may vary depending on your specific requirements and configurations. Make sure to refer to the Azure CLI documentation for detailed usage and options.

​
Using Python

To remediate issues related to AzureNetwork using Python, you can use the Azure SDK for Python. Here are three examples of how you can remediate common issues:

  1. Example 1: Enable Network Security Group (NSG) Flow Logs

    • Use the azure.mgmt.network package to retrieve the NSG resource.
    • Enable flow logs for the NSG by setting the enable_flow_logs property to True.
    • Update the NSG resource using the network_client.network_security_groups.create_or_update method.
    from azure.identity import DefaultAzureCredential
from azure.mgmt.network import NetworkManagementClient

# Authenticate using default credentials
credential = DefaultAzureCredential()
network_client = NetworkManagementClient(credential, subscription_id)

# Retrieve the NSG resource
nsg = network_client.network_security_groups.get(resource_group_name, nsg_name)

# Enable flow logs for the NSG
nsg.enable_flow_logs = True

# Update the NSG resource
network_client.network_security_groups.create_or_update(resource_group_name, nsg_name, nsg)

  2. Example 2: Add a Network Security Rule to an NSG

    • Use the azure.mgmt.network package to retrieve the NSG resource.
    • Add a new security rule to the NSG by appending it to the security_rules list.
    • Update the NSG resource using the network_client.network_security_groups.create_or_update method.
    from azure.identity import DefaultAzureCredential
from azure.mgmt.network import NetworkManagementClient
from azure.mgmt.network.models import SecurityRule

# Authenticate using default credentials
credential = DefaultAzureCredential()
network_client = NetworkManagementClient(credential, subscription_id)

# Retrieve the NSG resource
nsg = network_client.network_security_groups.get(resource_group_name, nsg_name)

# Add a new security rule to the NSG
new_rule = SecurityRule(name="Allow-SSH", protocol="Tcp", source_port_range="*", destination_port_range="22", access="Allow", direction="Inbound")
nsg.security_rules.append(new_rule)

# Update the NSG resource
network_client.network_security_groups.create_or_update(resource_group_name, nsg_name, nsg)

  3. Example 3: Update Network Security Group Rules

    • Use the azure.mgmt.network package to retrieve the NSG resource.
    • Modify the existing security rules in the NSG as required.
    • Update the NSG resource using the network_client.network_security_groups.create_or_update method.
    from azure.identity import DefaultAzureCredential
from azure.mgmt.network import NetworkManagementClient

# Authenticate using default credentials
credential = DefaultAzureCredential()
network_client = NetworkManagementClient(credential, subscription_id)

# Retrieve the NSG resource
nsg = network_client.network_security_groups.get(resource_group_name, nsg_name)

# Modify the existing security rules in the NSG
for rule in nsg.security_rules:
    if rule.name == "Allow-SSH":
        rule.access = "Deny"

# Update the NSG resource
network_client.network_security_groups.create_or_update(resource_group_name, nsg_name, nsg)